MNT Reform Motherboard 2.5

The Successor to the MNT Reform Motherboard 2.0.

This is the latest MNT Reform motherboard (version 2.5), which replaces version 2.0. It is compatible with all our Reform CPU modules:

What's New?

We've revised version 2.0 of the MNT Reform motherboard, fixing some bugs with the initial design as well as switching parts out based on availability. The main improvements are:

  • Lowered headphone lowcut filter for improved bass response
  • USB-C replaces microUSB as the LPC flashing connector
  • Lowered power LED brightness
  • Fixed current leak through balancing circuit that could bypass missing cells
  • Fixed main buck converter enable behavior under low voltage condition
  • Fixed charger control circuit that previously required a factory resistor bodge

Detailed Specs

  • Open Source Hardware
  • Carrier board for the aforementioned modules
  • Stereo speaker connector and TRRS headphone jack powered by Wolfson WM8960 ADC/DAC with high quality filtering
  • HDMI port
  • 3x USB 3.0 Type A ports
  • 2x USB 2.0 internal ports (JST-PH)
  • TUSB8040 USB hub
  • Full-size SD card slot
  • RJ45 jack for 1 Gbit ethernet
  • mPCIe slot with 1x PCIe signals
  • M.2 key M slot with 1x PCIe, 1x SATA or non-functional depending on module
  • LPC11U24 system controller with open firmware, flashable via dedicated USB-C port, controllable via dedicated SYSCTL UART
  • Power input via barrel jack or 2x Molex PicoBlade battery connector
  • Wide input range (7-32 V), high current (60 W) power system with 8 S LiFePO4 charger based on LTC4020 and LTC6803-4. Can be used as internal USV.
  • Coin cell backed real time clock (PCF8523)
  • MIPI-DSI to eDP converter (TI SN65DSI86) on board to convert display signals for an eDP panel (on 2 mm DuPont header connector)
  • 2x console UARTs on pin headers
  • Dimensions: 27.6 cm x 9.5 cm

In the Box

  • MNT Reform Motherboard 2.5
  • Manual

Support

More from MNT

Price

€250.00

Out of Stock